Elevator Restoration on a Budget

By February 10, 2020February 20th, 2020decorative films, Wall Wraps
White elevators in a lobby with belbien film

Elevator Restoration for a Fraction of the Cost

A dirty, scratched, or dated-looking elevator doesn’t exactly inspire confidence from its passengers. If anything, it’s more like a horror movie and the passengers are waiting for the elevator to drop. Since being packed into an elevator with a group of strangers is already uncomfortable enough for a lot of people, you want your elevator interior to feel like a safe, clean space that gives people a good impression of your property and makes them feel at ease. Your elevator will give its passengers an instant impression of your building and your business, so you need to make sure it’s a good one. 

If the interior of your elevator is so broken or so damaged that pieces need to be replaced, you might need a remodel. However, if the problem is normal wear-and-tear – things like graffiti, scratched surfaces, or outdated style, refinishing your elevator is just as effective and far more cost-effective than a complete remodel. Enter 3M DI-NOC and Belbien in metallic finishes. 

Why You Should Resurface Your Elevator Rather Than Remodel

Your elevator is an important touchpoint for your customers. It gives them an all-too-important first impression of your building and your business, and if your elevator is dingy, defaced, or even a little dated, it can send the wrong message. Luckily, you don’t have to break the bank to give your elevator a facelift and create an aesthetic that makes them feel like they’ve chosen the right place to do business. Here are just a few reasons why you should choose to resurface rather than remodel your elevator interior:

  • It’s Cheaper
    Not only does refinishing save you valuable time because of the ease of installation, but refinishing rather than remodeling your elevator can literally save you thousands of dollars in material costs. Gutting the inside of an elevator and replacing worn but perfectly serviceable materials is far less cost-effective than refinishing the surfaces by adding architectural film and wraps, which come in an endless variety of textures, colors, and finishes that will make your elevator look brand-new in no time. You could even give it a silk-like appearance…if you’re into that sort of thing.
  • It’s Environmentally-Friendly
    Fully remodeling an elevator typically means that there will be parts of your existing elevator that will be scrapped and thrown away entirely. This is unnecessary in many cases, as most surfaces are simply outdated and can be refinished rather than replaced. When you remodel an elevator interior, you throw away all the old parts, which need to be replaced entirely. In most cases, these surfaces are fine – if they are still structurally sound, all they need is a makeover, not a replacement. Think makeover instead of plastic surgery. Resurfacing with architectural film creates far less waste, and protects the underlying surfaces for years to come.
  • Less Time to Install and Less Disruption to Your Business
    If you choose to refresh your elevator with wraps or films, your elevator will not need to be recertified as it would if you were to perform a full remodel. Our service teams can be in and out in a fraction of the time a full remodel would take, leaving your elevator looking good as new in much less time. Architectural films like 3M DI-NOC or Belbien require very little preparation, no demolition or construction, and less equipment, which results in a faster installation process with minimal impact on your daily business. We will even come in during closed hours to reduce the impact as much as possible, a literal transformation overnight!
  • Give Your Elevator Character
    Riding in an elevator can be a terrible experience. We’ve all been there, forced into awkward silence and interactions with people we don’t know. Why not give people something pleasant to look at during that awkward silence, or better yet, provide customers with something that’s going to start a conversation? Elevators don’t need to be a simple silver metallic– they can be– but they can be so much more with the hundreds of options from 3M DI-NOC and Belbien.

Preventative Care and Restoration

Finishing your elevator interior with a wrap or film will not only elevate its appearance, but it will also protect the interior of the elevator and preserve the original materials for longer. Most elevator interiors are finished with metals such as steel or copper that scratch easily. A film such as 3M DI-NOC is scratch-resistant and available in many metallic finishes. If you have a new elevator, we also offer clear protective films that protect your walls and floor from normal wear and tear. NGS also specializes in the installation of metal and glass anti-graffiti coatings, which allow you to renew metal and glass surfaces without undergoing an expensive replacement. Mirror and metal finishes are available that allow you to install a protective surface directly over the damaged underlying material, which will renew the surface appearance and save you thousands of dollars.

Why waste time, money, and materials when you could make your elevator look brand-new in a fraction of the time? 

 

Contact NGS to discover all the options available to help your business upgrade your elevator and other interior surfaces.

 

Can’t get enough?

Sign up to get the latest news on window film,
graphics, and signage delivered to your inbox every month!